Sikafloor CureHard 24 | 1-Part Sodium Silicate Clear Surface Hardener, Dust Proofer and Densifier for Concrete

SODIUM SILICATE BASED TRANSPARENT SURFACE HARDENER, DUST PROOFER, SEALING AND CURING COMPOUND FOR CONCRETE

Description

Sikafloor® CureHard-24 is a high solids, one part, clear sodium silicate based liquid to cure, harden and seal fresh or hardened concrete.

Uses

Sikafloor® CureHard-24 may only be used by experienced professionals.

• Horizontal old or new concrete surfaces, where a hard surface with light to moderate abrasion resistance is required e.g. warehouses, industrial plants, stores, shopping malls, parking structures, service stations, hangars etc.

• On concrete slabs where no specific curing efficiency or standards are required

• Suitable for interior or exterior applications

• Dust-proofing of prefabricated concrete elements

• Suitable for protection against ingress (Principle 1, method 1.2 of EN 1504-9)

• Suitable for physical resistance (Principle 5, method 5.2 of EN 1504-9)

Characteristic & Advantages

• Ready to use

• Easy to apply

• Improved chemical and abrasion resistance compared to untreated concrete

• Reduced dusting of concrete floors

• Slightly reduces loss of water of new concrete while setting

• Improves cleanability

• Non-yellowing

• Good penetration

• Solvent free

• Colourless and odourless

Colour

• Clear liquid

Packaging

• 20 litre / pail

• 200 litre / drum